рус | eng
Производительность.рф
Products Contact us

Axial I.D.-fans

Home > Products > Industrial fans > Axial I.D.-fans
ДОД type axial double-stage ID fans are meant for flue gas removal from furnace of 640-2,650 t/h capacity stationary steam boilers of power units with 200, 300, 500 and 800 MW capacities, given residual dust content in flue gas doesn’t exceed 0.5 g/m3. Maximum allowable temperature of handled flue gas at the inlet of ID fan must not be above +200 ◦C..

ДОД ID fan is manufactured of left-hand rotation only, i.e. its impeller rotates exclusively counterclockwise, if viewed from the side of the drive.

ДОД-43
Nominal aerodynamic parameters, given as follows at ID fan inlet: Pressure – 101,300 Pa, Temperature – 100°С, Flue gas density – 0.946 kg/m³
Capacity, Q, thous. m³/h 1335,0
Total pressure, Pv, Pa (kgf/m²) 3491 (356)
Maximum Efficiency, ηmax, % 82,5
General parameters
Frequency of rotation, n, rpm 375
Weight (without electric motor), kg 100110
Electric motor parameters
Output, kWt 3150
Frequency of rotation, rpm 375
Voltage, V 6000
All rights are protected.
©2017 Sibenergomash.
Site map