рус | eng
Производительность.рф
Products Contact us

Hot-blast F.D.-fans and I.D.-fans of Gas Recirculation

Home > Products > Industrial fans > Hot-blast F.D.-fans and I.D.-fans of Gas Recirculation
Hot-blast FD fans and ID fans of gas recirculation are employed in systems where fuel is dried and prepared for combustion, in flue gas recirculation systems of boiler units as well as in operation lines of metallurgical and other works. Maximum temperature of handled medium at the inlet of hot-blast FD fans and ID fans of gas recirculation must not exceed 400 °C. At the same time there are several exclusions concerning temperature of handled medium at fan inlet. Maximum temperature for ВГД-22SД is 250 ◦C, while for ДРГ-19.5 and for ДРГ-19.5Ф it comes to 420 °C.
ВГД-16SД
Nominal aerodynamic parameters, given as follows at ID fan inlet: Pressure – 101,300 Pa, Temperature – 100°С, Flue gas density – 0.946 kg/m³
Capacity, Q, thous. m³/h 40,0
Total pressure, Pv, Pa (kgf/m²) 8385 (855)
Maximum Efficiency, ηmax, % 82,0
General parameters
Frequency of rotation, n, rpm 1500
Weight (without electric motor), kg 3620
Electric motor parameters
Output, kWt 200
Frequency of rotation, rpm 380/660
Voltage, V 1500
All rights are protected.
©2017 Sibenergomash.
Site map